Curved Garden Bench – Make an additional seat for your living space with this curved wooden bench. The elegant and vaulted wooden bench seat will create a softer line that offers greater comfort. Plywood furniture grade is used for the seat, bottom and legs so you can stain or paint the bench to match the existing furniture in your home.
Place two 3/4-by-18-of-32 inch panels on a work surface with the sides of 18 by 32 inches flat screen. Draw a convex curve on the opposite side 32 inches long of the panels with the flexible curved ruler. Cut the curved seat and bottom panels out using a bandsaw. Place the bottom panel with the flat 16-by-32 side of the screen on a work surface. Place the 3/4-by-16 inch end of the three 3/4-by-16-of-18 inch panels at the top of the ends and the center of the bottom panel so they are perpendicular to it.
12 Picture Gallery: Build Your Own Wooden Curved Garden Bench
Align 2 L-brackets inside the joint between the legs outside and the bottom panel so that each is 2 inches from the outer edges. Fix them in place. Place the seat on the upper legs so that the curved edges correspond to the edges of the bottom panel. Fix the L-brackets on the bottom of the seat. Rotate the Bench for mounting so that the bottom panel is facing up. Fill all screw holes in the putty wood assembly and the edge of a spatula. Apply the edge bands to the exposed 3/4 inch edges of the seat, bottom, and legs using an iron to join the edges. Trim both edges and apply a wood finish to the curved bench and let it dry before use.
This post topic: Garden Bench