Subway Tile Kitchen Backsplash – Rectangular subway tiles are frequently installed in a bonus run or off-set pattern. They come in several materials, including glass, and are often used in kitchen backsplashes. Because the running joint pattern requires medium tiles at each end of a tile run, multiple cuts are required for installation. When cutting the tiles from the glass subway, always use a wet tile saw that has been fitted with an embedded diamond blade.
This will minimize chipping on the surface of the glass. Place the subway tiles on the countertop in the kitchen in front of the back wall area to determine the pattern of the installation. Mark each subway tiles backsplash that should be cut with a grease pencil to indicate when the cut should be placed. Raise the arm of the wet saw blade and use a wrench to loosen the nut that holds the standard blade in place. Remove the nut and the blade.
24 Picture Gallery: How To Customize Subway Tile Kitchen Backsplash
Replace the blade with a blade of cut with encrusted diamonds and tighten the nut. Lower the blade arm into place. Place the glass tile on the plate in front of the blade and turn on the saw. Gently push the kitchen backsplash towards the blade. Do not force the glass through the blade; the sheet is cut into the tile with slight pressure. Let the blade cut through the tile, and then turn off the blade and remove the ceramic pieces.
This post topic: Tile Backsplash