Peel and Stick Tile Backsplash – Take-off and stick tiles are a popular do-it-yourself project. And it is frequently approached by the beginner by hand homeowner who wishes to save on installation costs pavements. While the process seems to be easy, there are obstacles that the inexperienced often encounter when it comes to this project for the first time. An example is how to cut the tiles from the shell and the stick to fit in areas too small for a full tile.
Measure the location where the cutting tile will be installed. Transfer the measurements on the top face of the tile to be cut with a China marker and taking care to check the precision measurements. Place the tile top up on a hard surface with resistance to cuts. Align a straight edge rule on the cut line, press the ruler adjusted to the tile so that neither ruler nor tile can change position.
12 Picture Gallery: How to Cut Peel and Stick Tile Backsplash
Cut the tile, using a knife with the blade at a 45 degree angle and pressing firmly on the tile. Note that it is not necessary to cut through the tile, but to mark deeply with the knife. Hold the tile in both hands with the cut between your hands; fold the slates in half. It will fit where the score was cut cleanly. Light the tile one and crack the protective paper in the cut. Your tile is now ready to install.
This post topic: Tile Backsplash