Bathroom wall tile are common to bathrooms and kitchens. They are durable and can become wet without worry, making them ideal for areas with water. Although they are usually durable, sometimes ceramic wall tiles crack, get hacked or break. Damage destroys the appearance and usefulness of the tile, leaving weakness in the wall that needs repair.
24 Picture Gallery: How to Fix Bathroom Wall Tile
Assess the damage. Minor damage, such as a crack or corner that has been broken off but not lost, can easily be determined while major damage may require replacement washers. Look at the type of damage and how much damage. Repair cracks with epoxy glue mixed with colored enamel to match bathroom wall tile. For minor damage such as a crack, use epoxy glue to fill the crack. The enamel is to match tiles to make glue less noticeable. Small chips in the corners or nicks in the middle can be fixed by the same method. That one day for the epoxy glue dry.
Fix large edged corners using adhesive and fallen corner. If the corner is lost, it is possible to put a small amount of glue below the corner and push the corner back into place. This avoids replacing tiles completely, while still repairing tiles. Be careful not to apply too much glue. Replace plates that are badly damaged. Leaving badly damaged tiles can be dangerous. To replace damaged tiles, carefully chip out around the bathroom wall tile grout until the tile is loose before removing the tile. Remove any chipped grout and check that replacing the tile fit before putting tape on the back and pressing the tile into the space, moving back and forth so it sticks. Add grout after 24 hours.
This post topic: Basement Stairs