Wooden Garden Bench – When landscaping your yard, don’t overlook some of the landscaping features. A good addition to any garden is the addition of a simple solid bench. Not only do they look good, but it also provides a place to sit soak in all the fruits of your work. And it only requires some basic carpentry skills.
Dig two holes 32 inches apart and 32 inches deep using a post hole excavator. Adjust the level through both messages to make sure they are level with each other. You may have to add some filler again in one of the holes. Fill both holes to the top of ready-mix concrete and follow the package instructions for the amount of water to add. Slide the rear base brackets over the top of the posts when the concrete has completely set. Adjust the seat of the press-treated bench 2 by 10 inches on the posts, and use the ruler, center side to side and front to back.
12 Picture Gallery: How to Make a Wooden Garden Bench
Remove the seat and place the base supports of the posts. Place the seat on the bottom zero sides so that your pencil marks are showing. Screw the base supports of the pole within its marks to the sidewalk with 1-inch screws. Place the seat back on the messages, sliding the base supports set for both charges. Screw the base supports back to the posts with screws larger than 1 inch. Sand the edges and top of your bench to remove splinters and even slightly around the edges.
This post topic: Garden Bench