Storage bed frame – all that cubic footage covered with draping bedding, without contributing anything to the neatness or storage in the room. By replacing a double bed frame with a single storage bed, you can add more than 30 cubic feet of accessible storage. Set aside an afternoon for this project, which is easily available to novices and intermediate carpenters.
Ideas for build storage bed frame, sand all surfaces of your wood using grain sandpaper. Establish a long and a short beam in a beam of L, with the end of the long beam against the face of the short. Screw the other one with two wood screws. Add the second short beam to the free end of the long beam, turning your L into a square-off C. Screw it together as you did the first. Slide the second long beam between the arms of the C until it runs parallel to the other long beam. Beam centers should be 16 inches apart. Screw in place as in the previous steps.
12 Picture Gallery: Ideas and Design of Storage Bed Frame
Slide the shortest beam between the arms of the C, which runs parallel to the short beams and on the open side of the frame. It must be the same distance from either arm. Screw in place. Set up a sheet of plywood on the frame so that it covers the open side and its inner edge runs along the middle of the center support beam. Set the other sheet of plywood to cover the rest of the frame. Attach to the first leaf using the tree hinges: one near each edge and one in the center.
This post topic: storage bed