Modern bathroom faucets – Replacing bathroom faucets is a great project for the home repairman because the process is simple and only takes a short period of time to complete. Close the hot and cold water supply valves mounted under the sink. The shut-off valves are mounted in line with the water lines that adhere to the faucets under the sink. To deactivate them, turn the valve handle counterclockwise. Turn on the faucets in the sink to drain excess water out of the lines.
Locate the compression valve fittings mounted on the bottom of each tap. Although you can only have a dripping faucet, in many cases, the hot water tap, cold water tap and the spigot are combined in one unit. If the faucets in the sink or sink are separate units, locate the accessory compression valve attached to only the defective faucet. Loosen the connection with compression clamps. Wait for some water to seep when loosening the connection.
25 Picture Gallery: Ideas for Modern Bathroom Faucets
Loosen the retaining nuts that secure the faucet to the plastic sink cover. The thread retaining nuts on the measured tap nozzle extend across the surface of the sink. Use pliers to remove retaining nuts. Pull the water tap from the sink surface and wipe the surface of the cover with a clean cloth. Place the new faucet on the surface of the sink. Screw the plastic retaining nuts onto the faucet nipple, and then tighten in place with the pliers.
This post topic: Bathroom