Replacing basement stairs – Stair rails and handrails are an important safety feature in any basement. A properly installed stair railing can prevent many slips and falls down the stairs. However, these railings may loosen or fall over time. This makes the handrail dangerous. stair rails can also become dated over time. Regardless of the reason your are replacing the railing, the task is not difficult, but you have to do it correctly. Learning how to install a stair railing will help you get up and running in this home security project.
Remove the old stair railing. Use a screwdriver to unscrew the handrail brackets from the wall. Fix the wallboard panels as necessary. Fill large and unnecessary holes in the plaster mud wall. Let the mud dry. Sand and paint the area. Place one level on the tread of the upper ladder and adjust until it is plumb. Mark the wall at 36 inches above the top step. Repeat the process on the bottom step. Connect the two lines with a chalk line.
25 Picture Gallery: Ideas for Replacing Basement Stairs
Locate the studs on the wall with a beam detector. Mark the posts with a pencil. Adjust the new handrail brackets on the wall where the studs are located. Use a pencil to mark the screw holes in the brackets. Create guide holes for handrail brackets with a drill and drill. Screw the handrail brackets to the wall with a screwdriver and the screws. Secure the handrail to the handrail supports. A handrail is drilled for the support screws with a drill and drill. Use a screwdriver to screw the handrail to the handrail brackets.
This post topic: Basement Stairs