Replacing tile floor is a lot of work. It takes a lot of jumping away in the grout and tiles. However, spending time to remove a ceramic tile floor will make it possible for you to install new and updated ceramic tiles. A new ceramic tile floor will be a functional and beautiful asset to your home. undercut the grout with a slurry carbide tip. Remove the grout on the entire floor.
Remove the ceramic tile by placing the chisel under the tile in the joint of the tile. Use the chisel and a hammer to remove the tile. Continue removing the tiles one row at a time. In some cases a circular saw can be used to cut the plywood under the tile and remove large sections of the tile quickly by removing the plywood. The floor should be mostly level and smooth once you have removed all the tile. The areas that are not mostly without problems should be leveled before installing the cement panels.
12 Picture Gallery: Ideas for Replacing Tile Floor
Remove dirt and dust from the floor with a vacuum cleaner and a broom. Measure the dimensions of the room with a tape measure. Use the measurements to mark and cut the cement panels for the room. Cut the cement plate with a blade carbide tip on a jigsaw. It will have to be installed in several large pieces at the bottom of the support table.
This post topic: Floor Tile