Storage ottoman are multitasks of the furniture world, serving not only as footrests and concealed storage, but also as makeshift coffee table end or even emergency seating. Make your own DIY ottoman with storage, you can customize your ottoman size, shape and color, to create a custom piece that seamlessly integrates into your room’s existing design system. In addition, building pallet storage is often much cheaper than buying an ottoman from the shelf
12 Picture Gallery: Ideas of Storage Ottoman
Measure and cut four pieces of pine to 1 foot by 1 foot. Storage ottoman with Measure and cut two more pieces to 13 inches by 13 inches, cancel these two pieces. Run a small amount of glue along one of the smaller boards “1-inch wide edges. Attach another one of the 1-foot board edges that glued the edge; you should create a 90-degree” L “shape with two boards. Configuration in place
Attach another pine bit again by gluing and clamping, now you have a “U” shape, put the last piece of the puzzle, this time gluing and clamping in two places. The receiver now sees the square. Along each edge that has a storage ottoman side beneath it, marks a dot every 2 inches, about 100 cm from the edge. Run nails into each brand by tapping them with the hammer. Wipe the oozing glue with a damp towel. Leave your clamps on and allow the adhesive to dry for at least 24 hours. Remove the clamps. Drive a row of wood glue along the 1-inch wide bottom of your square. Place a 13-inch piece of pine over these glued areas, matching all edges. Run the nail in the edges of the inch from the outer edges, placing a nail every 2 inches.
This post topic: storage ottoman