Farmhouse bathroom vanity – Whether you want to replace the existing bathroom vanity or install a vanity in a new home, it is a challenging do it yourself project. Vanities are available in a variety of sizes and colors. If an existing dresser is replaced, you will need a new one that is similar in size to avoid extra work. Doing the job yourself can save you a significant amount of money.
Open the hot and cold water down at the shut-off valves under the sink by hand. Disconnect the trap from the sink of the vertical drain pipe from the hand. Disconnect the hot and cold water lines from the disconnect valves with a standard wrench. Remove the putty from the entire plate of the sink, using a utility knife. Use a lever bar to lift the sink out of the vanity.
24 Picture Gallery: Ideas to Install Farmhouse Bathroom Vanity
Use a screwdriver to disconnect the screws that secure the dresser to the wall. Cut the vanity base away from the water pipes by using a reciprocating saw. Place the new dressing table in the place of the old one. If you need to relocate the water lines in the toilet, close the water in the water meter or the main shut-off valve. Install new copper water supply pipes. Also the installation of new shut-off valves if necessary. You must have a plumber perform this task to ensure proper installation.
This post topic: Bathroom