Farmhouse sink with drainboard helps to keep the drain from leaking. Made of durable rubber and rarely subject to pressure, the joint rarely goes badly or needs to be replaced. However, in case you have to replace the lack of a defective or damaged packaging, the process is simple, no more difficult than replacing a bulb. In fact, the hardest part of all the work is on your knees to get under the sink.
Clear the area under the sink. Loosen the sliding nuts connect the drain pipe (section of the pipe connecting the filter and the drain pipe) with the pliers, and remove the drain pipe by hand. Remove the lock nut at the bottom of the leak, using the pliers, and unscrew the drain lock ring with the filter basket wrench. Press on the key with the hammer if the locking ring will not move. He put them aside so much, and then push the strainer sink assembly up into the sink.
12 Picture Gallery: Ideas to Replace Farmhouse Sink with Drainboard
Remove the drain seal and drain the drain unit seal by hand. Scrape plumber putty any age, from the unit, using the spatula. Slide the new gasket and drain seal onto the unit by hand. Apply a bead of plumber’s putty to the bottom of the drain unit before re-inserting it into the sink. Replace the drain lock ring, followed by the drain lock nut. Replace the drain tube, reconnect it to the drain pipe and tighten the sliding nuts by hand. Turn halfway round with the pliers. Do not over tighten.
This post topic: Farmhouse Sink