Mosaic tile backsplash – The best way to organize the design of the back wall and deal with the task of applying meticulous wall mosaics is to make the design of the back wall of the mosaic in pieces of fiberglass mesh, which can then be adhered to the wall in sections. Divide your rear wall design sketch into a grid of squares no larger than 1 of each foot. Number of squares, so you know the order in which they enter, and then cut the design into squares with scissors. Cut fiberglass mesh squares to the same size as your design squares.
Place a flat square design on a work surface and place a square of fiberglass mesh on top. Stick to your tiles using mosaic adhesive, following the design under the mesh, and ensure a space of approximately 1/8 of an inch between each tile. Place the tiles on the grill with the tongs if they are very small. Unlike regular tiles, tiles are kept in place mainly by grout, so the adhesive is used to set the size and to keep the tiles in position while grouting.
12 Picture Gallery: Mosaic Tile Backsplash Design Ideas
Repeat in all the design squares so that you have done all the mosaic of the back wall. The design of the rear wall has been completed. Remove the design sketch from behind the mesh fiberglass so that it is not trapped there, and place it gently on top of the tile so you know the sequence of the square in the design.
This post topic: Tile Backsplash