Removing tile from floor – Get started with the tile work with a number of good advice and small guides for the process itself. There are some conditions that you must take into account before you start laying tiles. For example, it is not without significance where in the house the tiles should sit. Selection of materials such as tile mortar, etc. is also dependent on the room type and the nature of the substrate.
Before you start setting up the tiles, make a measurement of the room’s walls and / or floor. You must determine the height of the tile cladding. Calculate the height from the lowest point to the floor. It is usually nicest to finish with a whole tile for the top and possibly. Adapt the bottom to the floor.
13 Picture Gallery: Removing Tile from Floor: It’s Simple!
It is important that the joint of the joint is clean and dry. Before joining the joints, cover with a tape on both sides, then fill the joint completely. Within 10 min. Compact and lubricate the joint with a wooden stick moistened in water – or with a steel trowel. The cover tape is removed immediately after. The joint is after glazed with a moistened grout. Alfix Silicon is color-matched to the Alfix grout mortars.
This post topic: Floor Tile