Replacing Carpet on Stairs with Wood – Remove old carpets, worn on the stairs for an immediate upgrade to your home. Carpet softens the sounds step by step and makes the falls softer for children, but wooden steps are much easier to clean.
Find the upper seam of the carpet at the top of the stairs. Remove all nails or tacks that hold it so that it has at least six inches of carpet on it to hold. Pull the carpet down the stairs. Roll the carpet while lifting it from the stairs, letting the weight of the work carpet with you as you take it up to the stairs. Leave the backing and tile strips exposed. Use a hammer to lift the strips off the tack, being careful not to pierce the skin with sharp ends. Collect the tacks in a pull box.
12 Picture Gallery: Replacing Carpet on Stairs with Wood DIY
Pull the holder upwards using a scraper to scrape the adhesive that could have been used. Gather as you go and those things in a garbage bag to keep dust and extra dirt from getting thrown around. Check each step for nails, staples or tacks left behind. Gently soften your hand through the surface of the measurements to feel if there are hard objects. Pry out all the objects in the steps, being careful not to cut the wood. Empty the stairs to vacuum all the fine dust left behind. Wash the bare stairs with a cloth moistened in soapy water, rinse frequently in a bucket of warm soapy water. Start at the top of the ladder and your way of working.
This post topic: Wood Stairs