Attic stairs covers – roof stairs allow you to keep the attic entrance hidden out of sight and mind, but they also allow drafts of cold air to come through your house from the top floor. While weather-stripping the panel to the stairs is a way to maintain drafts, you can also make a ladder cover of the folding foam attic and insulating tape to further isolate the area.
Ideas of roof covering attic stair, climb into the attic and close the stairs behind you. Measure the width of the opening through which the stairs fall. Cut two strips of foam board with a knife. Tape the strips together so that they form a box-shaped frame that fits around the opening of the ladder. Sweep the opening around the folding ladders in motion with a broom.
25 Picture Gallery: The Best Attic Stairs Covers
Place the frame of the box around the opening. The walls of the box must be higher than the closed stairs. Place the box on the floor with the strips of adhesive tape. Measure the opening of the foam box and cut out a rectangle of foam that matches this measurement. Place the rectangle squarely on top of the box. This is the cover for the cover of the staircase. Run a line of ribbon along one long side of the rectangle to attach it to the box below.
This post topic: Attic Stairs